This Download will update the Digilink-Xtreme and X-Edit software to the 2012 version. This process only works if your Digilink-Xtreme and X-Edit software are contained in the C:\Arrakis folder. If your software is contained in a different folder, you will need to manually change the files.

Here are the steps to update:

1) turn off the Digilink-Xtreme and X-Edit programs

2) click on this link to download the software updater: Update All to 2012 1.9.9 XP

3) your internet browser will ask you if you want to Run or Save, select Save, and Save the file to the desktop

4) delete all Digilink-Xtreme and X-Edit shortcuts that are on the desktop

5) double click on the UpdateXtremeAllXP.exe file that you downloaded to the desktop and select Continue

6) click yes to all the messages. It will then delete the original Digilink-Xtreme.exe software in the C:\Arrakis folder and replace it with the updated software. It will also create shortcuts on the desktop if it doesn't already exist

7) make sure that your Playback and Record Windows sound card settings are set to use the PC sound card, not the USB Audio Codec sound cards on the Bridge

8) after Xtreme is updated, go to MENU in the Xtreme software, then SETUP and make sure that "Enable Air Test" is NOT checked

9) go to the Start menu in Windows. Select All Programs and find the Startup folder. Right click on the Startup folder and select Open

10) delete whatever shortcuts are currently in the Startup folder.

11) copy the Digilink-Xtreme shortcut from the desktop and paste the shortcut in the Startup folder. Verify that the shortcut opens to the correct 1.9.9 version of Digilink-Xtreme

If you see either of these messages, then check out these solutions to fix your issue:

Software has expired and will not startup - SOLUTION

mmmpeg32.dll error message is displayed - SOLUTION

This section has software that has been tested at the factory, but not extensively in the field.

Digilink-Xtreme BETA SOFTWARE VERSION 1.50 1-10-2012

Notes: this version shuffles small music categories more effectively than previous versions. No other pieces of the 1.50 version has been changed. THIS VERSION IS FOR Windows 7 ONLY. DO NOT USE with Windows XP.

SETUP INSTRUCTIONS

1) turn off your Digilink-Xtreme software

2) open the C:\Arrakis folder, delete all older versions of the Digilink-Xtreme.exe

3) download this software: Digilink-Xtreme (1-10-2012).exe

4) move the newly downloaded Digilink-Xtreme (1-10-2012).exe to the C:\Arrakis folder

5) make sure that your desktop shortcuts to the Digilink-Xtreme (1-10-2012).exe is accurate. Otherwise it may be necessary to delete the current desktop shortcuts and recreate them

These files are mandatory for running the Digilink-Xtreme. They are required to be inside the C:\Arrakis folder.

Support Files

1) download these Support Files

2) open the downloaded folder and extract the files

3) take the extracted files and move them to the C:\Arrakis folder

Download Bridge Tools:

1) download Bridge Tools

2) place Bridge Tools in the C:\Arrakis folder

This Download will update the New~Wave to the latest version. This process only works if your New~Wave software is contained in the C:\New Wave folder. If your software is contained in a different folder, you will need to manually change the files.

Here are the steps to update:

1) turn off the New~Wave program

2) click on this link to download the software updater: Current New~Wave

3) your internet browser will ask you if you want to Run or Save, select Run (if there is no option to 'Run', then Save the file to the desktop and double click on the file to run the program)

4) click yes to all the messages. It will then delete the original New~Wave Lite software and replace it. It will also create shortcuts on the desktop if it doesn't already exist

All support files can be found on the New~Wave USB stick. These files must be contained in the C:\New~Wave folder:

-hvs883.dll

-mmmpeg32.dll

This Download will update the New~Wave Lite to the latest version. This process only works if your New~Wave Lite software is contained in the C:\New~Wave folder. If your software is contained in a different folder, you will need to manually change the files.

Here are the steps to update:

1) turn off the New~Wave Lite program

2) click on this link to download the software updater: Current New~Wave Lite

3) your internet browser will ask you if you want to Run or Save, select Run (if there is no option to 'Run', then Save the file to the desktop and double click on the file to run the program)

4) click yes to all the messages. It will then delete the original New~Wave Lite software and replace it. It will also create shortcuts on the desktop if it doesn't already exist

All support files can be found on the New~Wave Lite USB stick. These files must be contained in the C:\New~Wave folder:

-hvs883.dll

-mmmpeg32.dll

Follow these steps to update only the X-Edit software:

1) turn off your X-Edit software

2) open the C:\Arrakis folder, delete all older versions of the X-Edit

3) download this software: 2012 X-Edit Software

4) move the newly downloaded X-Edit.exe to the C:\Arrakis folder

5) make sure that your desktop shortcuts to the X-Edit.exe is accurate. Otherwise it may be necessary to delete the current desktop shortcuts and recreate them

These files are mandatory for running X-Edit. They are required to be inside the C:\Arrakis folder.

1) download these Support Files

2) open the downloaded folder and extract the files

3) take the extracted files and move them to the C:\Arrakis folder